CONSTRUCTION
Hulls & floats: Bidirectional fiberglass and
proprietary
epoxy resin using vacuum infusion, NidaCore Stitch-Core foam, GE Lexan™
Margard
2™ polycarbonate windows.
Deck of main hull and Amas: GRP sandwich, NidaCore Stitch-Core
foam, proprietary epoxy resin.
Amas Hulls: fiberglass and proprietary epoxy resin.
Akas: Bi-directional and Uni-directional fiberglass and proprietary
epoxy resin
Internal bulkheads: fiberglass and NidaCore Stitch-Core
foam/proprietary epoxy sandwich.
COCKPIT
4 lockers under the seats, 2 of them for the gasoline tank(optional) and the gas bottle (optional) on port, removable board aft of the cockpit, 2 lockers with lids in the backrests, tube for the gasoline hose coming out near the engine, 2 pushpits, 1 folding bathing ladder, fixed outboard engine bracket, compass with light, 2 rope pockets, 2 winch handle pockets.
RUDDER / DAGGERBOARD
Kick up and vertical retracting composite rudder
mounted on
the transom, wooden tiller.
Composite dagger board, 2 ropes for raising and lowering
lead aft to the cockpit.
STANDING RIGGING
Rotating 13.0 m carbon composite mast and boom,
both painted
white.
19-strand wire rope diamond stay (6mm or ¼ inch)
Dyneema DUX with UV jacket, four stay (10mm)
Dyneema DUX with UV jacket, outer aft stays (10mm) with
tension
Dyneema DUX with UV jacket inner stays (10 mm) (optional)
RUNNING RIGGING
Dual sta-set mainsail sheet system using Garhauer blocks, 2 polyester jib sheets, sta-set X mainsail halyard, sta-set X halyard, sta-set X spinnaker halyard (optional), sta-set X screacher halyard (optional) polyester mainsail topping lift, 1 polyester mainsail foot, 2 sta-set reefing lines, 2 aft shroud purchases. Sta-set and Sta-set-X are from New England Rope.
SAILS
Jib Contender APEN laminate +/- 20.18 m² soft
hanked
with number 6 luff tape,
Mainsail Contender APEN laminate +/- 39.71 m² with 2
reefing lines, 1 mainsail cover.
DECK FITTINGS
Main
Composite folding struts, composite bow shroud fitting with towing hole , stainless steel pulpit, 4 cleats, anchor locker, 2 vertical turning blocks for dagger board maneuvering, stainless steel ball mast base, 2 Garhauer easy adjust jib tracks with cars, 2 sets of mast base blocks, 2 Garhauer 6 sheaves deck organisers, 2 Garhauer 4 line clutches, 2 Andersen 28ST 2 speed self tailing winches, 2 Ronstan cam cleats, 1 pair of inner composite shroud plates, dual Garhauer mainsail sheet system eyes, deck fill for water, deck plate for black water suction (optional).
On each float (Ama):
Composite bow eye, composite shroud and tension eyes, 3 inspection plates, opening hatch, 3 composite or metal eyes or cleats.
NAVIGATION LIGHTS
1 bicolor LED navigation light on pulpit, 1 stern LED navigation light on pushpit, 1 masthead 360 white LED light.
COMPANIONWAY
1 sliding entrance hatch, composite closing boards, closing board storage brackets, detachable 4 step companionway ladder.
ELECTRICAL
Paneltronics 12 volt DC electrical panel with 5 switches, protection by circuit breakers, 3 blank switch locations, 70 Ah AGM battery, cables, Main switch.
NAVIGATION AREA
Chart table with opening chart storage space, 1 LED ceiling light, 1 red LED night light.
MAIN SALOON
Folding pivoting wood table, wooden antiskid floor (optional), dinette with cushions, convertible pilot berth, 2 storage spaces in the back rests, storage under the seats, 36 L water tank, 2 LED ceiling lights, 1 fan (optional).
GALLEY
Stainless steel sink, Whale manual hand pump, 2 storage spaces, 1 LED ceiling light, 1 fan (optional), 1 through hull fitting with hose and Forespar valve, single burner GAZ type stove, opening port (optional), top load ice box (converts to refrigeration, optional).
HEAD
Fully enclosed with rigid door, 1 LED ceiling light, 1 Jabsco marine toilet, 1 sink with shower/mixer faucet (optional), shower sump with pump (optional), black water tank (optional) with “Y” valve (optional), mirror, cabinet and opening port (optional).
FORE CABIN
190 x 130 berth with cushions, large storage locker under the berth, 50 x 50 opening hatch, 1 LED ceiling light, 1 fan (optional).
AFT CABIN
200 x 100 berth with cushions, large storage locker under the berth, 50 x 50 side opening hatch, 2 opening ports (optional), 1 LED ceiling light, 1 fan (optional).
MISCELLANEOUS
Ritchie lighted compass, 1 Titan composite winch handle, mast storage support, mast gin pole, mast raising hinge.
Additional
images
Return to AM30e main
page
Order
Work Sheet
Deliver to and setup at your home port is additional.
We are now taking 10% ESCROW deposits for deliver late 2009.
[ Home]
[AM30e]
[AM33e]
[AM40e]
[AM40pt]
[History]
[Contact]